How to Connect Your Devices

1Create Server

Configure a VPS that fits your requirements.

1Log in to your Dashboard and navigate to the Deploy Server page.
2Select a plan.
3Pick the protocol you need.
4Choose a location for your VPN server. (You can change location and protocol later if needed)
5Complete the payment.
6The server will take approximately 10 minutes to configure automatically. Once the Status icon changes from Pending to Ready, your VPN server is ready to use.

2Choose Device

Select the operating system of your connecting device.

3Match Protocol

Pick the same protocol as your server runs.

4Download and install the app

iOS

5Connection Guide

Connect your iOS device to your WireGuard server by following the guide.

Method A - QR Code (Recommended):

Go to the dashboard

Click "GET VPN ACCESS" on server with WireGuard protocol

You will see QR code to connect

Open WireGuard application

Add a tunnel using the "+" or "Add a tunnel" button.

Choose "Create from QR code"

After scanning, name your tunnel "client1" and press "Save"

The tunnel named "client1" will appear in the list

Toggle switch to make "client1" tunnel Active

Method B - Configuration File:

Go to the dashboard

Click "GET VPN ACCESS" on server with WireGuard protocol

Download "client1.conf"

Open WireGuard application

Click "+" (select "Create from file or archive")

Import client1.conf file you just downloaded

The tunnel named "client1" will appear in the list

Toggle switch to make "client1" tunnel Active

⚠️ One device per config

6Check IP

Confirm your connection by checking your IP.

Open ipaddress.my to confirm the VPN is working correctly. You should see your server's IP address and country there, confirming the connection is active.

Can't find what you're looking for?

Check our support page.

FAQ→

How to Connect Your Devices

1Create Server

Configure a VPS that fits your requirements.

1Log in to your Dashboard and navigate to the Deploy Server page.
2Select a plan.
3Pick the protocol you need.
4Choose a location for your VPN server. (You can change location and protocol later if needed)
5Complete the payment.
6The server will take approximately 10 minutes to configure automatically. Once the Status icon changes from Pending to Ready, your VPN server is ready to use.

2Choose Device

Select the operating system of your connecting device.

3Match Protocol

Pick the same protocol as your server runs.

4Download and install the app

iOS

5Connection Guide

Connect your iOS device to your WireGuard server by following the guide.

Method A - QR Code (Recommended):

Go to the dashboard

Click "GET VPN ACCESS" on server with WireGuard protocol

You will see QR code to connect

Open WireGuard application

Add a tunnel using the "+" or "Add a tunnel" button.

Choose "Create from QR code"

After scanning, name your tunnel "client1" and press "Save"

The tunnel named "client1" will appear in the list

Toggle switch to make "client1" tunnel Active

Method B - Configuration File:

Go to the dashboard

Click "GET VPN ACCESS" on server with WireGuard protocol

Download "client1.conf"

Open WireGuard application

Click "+" (select "Create from file or archive")

Import client1.conf file you just downloaded

The tunnel named "client1" will appear in the list

Toggle switch to make "client1" tunnel Active

⚠️ One device per config

6Check IP

Confirm your connection by checking your IP.

Open ipaddress.my to confirm the VPN is working correctly. You should see your server's IP address and country there, confirming the connection is active.

Can't find what you're looking for?

Check our support page.

FAQ→